Dust control and erosion control of non-trafficked areas, such as tailings, stockpiles, and berms. DMS-TSF® has a gradual accumulative effect. Multiple micro-layers of foaming and film are formatted, enhancing the surface binding capacities, water retention, and dust particles encapsulation for extended periods. DMS-TSF® has high UV and extreme cold resistance, making it an ideal solution for severe weather conditions.
DMS-TSF® is usually applied using water trucks, hoses, water cannons, aerial applications (planes/helicopters). DMS-TSF application rates are between 2 to 3 L/sqm at a dilution of 3 to 5 v/v%.
Contact ABCDust for a substrate analysis and lab test before major surfaces applications, to assess the different application and dilution rates, and to recommend you the most homogeneous and safe application method based on your site topography.
- Low cost per m2.
- PM10-2.5 suppression at 85-90%
- Water savings
- 6 to 24 months duration
- Compatible with closure and revegetation initiatives
- Highly concentrated, reduce logistics costs.
- Water and UV resistance.
- Compatible with different types of water and substrates
- Nonionic, nontoxic, and non-corrosive.
- Compatible with the extreme cold of -30C.
DMS-TFS® is delivered in totes of 1,000 L, 122 cm x 102 cm x 122 cm. Store at temperatures between -30Co and 35Co. The product is highly concentrated, which facilitates its transport and storage
DMS-TSF® contains surfactants, so contact with the eyes and prolonged skin contact should be avoided. Therefore, the use of safety glasses, gloves and masks is recommended when handling the product. See more relevant information on the Safety Sheet.
The information contained in this leaflet is given in good faith, but no liability is assumed nor is freedom from any intellectual property owned by ABCDust. This information should not be taken to represent a specification for the product.tent
