DMS-DS® has nanopolymers, which allows it to bind the fine particles material and improve the surface friction conditions of the road course.
Making the forming foam together to form microlayers overlapping each other, with each application.
DMS-DS improves brake distances and reduces skid and hydroplaning risk. DMS-DS has been tested in high slope ramps of up to 16% with 600 tonnes loaded haul trucks. DMS-DS reduced brake distance by 30-80% while avoiding skid and hydroplaning risks.
- Reduce dust levels up to 95-99%
- Improve road braking distance, improving road safety
- Improve rolling resistance, reducing fuel consumption
- Non-toxic & non-corrosive product
- Water and UV resistant
- Acid and alkaline waters resistant
- Non-ionic
- Transparent when dried – No Stains
- Highly concentrated
ABCDust has developed a table of dosages according to the type of soil, traffic and climatic conditions to determine the doses and the most convenient and effective product for the goals of dust suppression and soil stabilization. Contact us to determine the proper doses for your dust control needs.
Best before 12 months.
DMS-DS® is supplied in 1.000 L drums or IBC drums. The product should be stored in a cool place out of direct sunlight.
DMS-DS® has some surfactant & preservative properties and as such contact with eyes and prolonged contact with skin should be avoided. Safety glasses or goggles; gloves and respiratory masks are recommended, when handling the product. Detailed information on handling and any precautions to be observed in the use of the product(s) described in this leaflet can be found in our relevant Health and Safety information sheet.
The information contained in this leaflet is given in good faith, but no liability is assumed nor is freedom from any intellectual property owned by ABCDust. This information should not be taken to represent a specification for the product.