DMS-DS® 100 is specially designed for soil stabilization and dust control of industrial roads, haul road and well-compacted surfaces, improving its overall strength and road materials agglutination. It can also be used on coal stockpiles/trains/trucks, preventing the creation of wind-borne coal dust, thus protecting the environment and saving valuable coal.
DMS-DS® 100 is formulated with environmentally friendly nanopolymers, surfactants and proprietary minerals. APE-free surfactants and no added formaldehyde. DMS-DS® 100 is added to watering trucks and mixed with water and sprayed onto road surfaces. It improves dust suppression performance while reducing water by at least 80%, by extending the dust suppression effects four to five times longer than water alone.
It improves the suppression ability by enhancing the adhesion & spreading abilities of water on coal particles.
Producing flexible and low surface tension foam to reduce the humidity and prolong the effect.
Foaming adhesion effect
Making the forming foam together to form microlayers overlapping each other, with each application.
Foaming adhesion effect
Making the forming foam together to form a tight layer.
DMS-DS® 100 has an accumulative effect, whereas a binding seal is created and reinforced with each application. Its nanopolymer size binds PM10 and PM 2.5 preventing the creation of the windborne material.
MAIN ATTRIBUTES & CHARACTERISTICS
- Reduce dust levels up to 85-95%
- Improve road braking distance, improving road safety.
- Improve rolling resistance, reducing fuel consumption
- Non-toxic & non-corrosive product
- Excellent water and UV resistance
- Acid and alkaline waters resistance
DOSAGES AND APPLICATION RATES
ABCDust has developed a table of dosages according to the type of soil, traffic and climatic conditions to determine the doses and the most convenient and effective product for the goals of dust suppression and soil stabilization. Contact us to determine the proper doses for your dust control needs.
Best before 12 months
SHIPPING AND HANDLING
DMS-DS 100® is supplied in 1.000 L drums or IBC drums. The product should be stored in a cool place out of direct sunlight. DMS-DS® is frost sensitive. Therefore, it is recommended that prolonged exposure to extremely low temperatures is avoided.
HEALTH AND SAFETY
DMS-DS 100® has some surfactant & preservative properties and as such contact with eyes and prolonged contact with skin should be avoided. Safety glasses or goggles; gloves and respiratory masks are recommended, when handling the product. Detailed information on handling and any precautions to be observed in the use of the product(s) described in this leaflet can be found in our relevant Health and Safety information sheet.
The information contained in this leaflet is given in good faith, but no liability is assumed nor is freedom from any intellectual property owned by ABCDust. This information should not be taken to represent a specification for the product.